Do you understand the operating specifications for multi-blade saws

Many operators do not pay attention to the standardized procedures and precautions when operating multi-blade saws, which has led to accidents due to improper operation methods. Today, we will tell you how to operate safely:



Scraper multi-blade saw blade

1. Operators must wear safety helmets, protective gloves, and other safety measures before going on duty.

2. Before starting the machine, check the balance of the equipment and the tightness of the parts, and ensure that the circuits are functioning properly without any loose or disconnected wires.

3. Check if the equipment's voltage, power switches, water pressure, etc. are working properly.

4. Check if the conveyor system and turbine reducer are filled with oil to ensure the normal operation of the conveyor system.

5. If there is any material jamming or tilting during the wood cutting process, immediately turn off the power for inspection, and restart the equipment only when it is back to normal.

6. Shut down the machine for maintenance and repair the saw blade after about 8 hours of operation to prevent abnormalities caused by excessive working time.

7. Regularly lubricate the transmission chain and transmission system to maintain the normal operation of the equipment.

8. After processing is completed, develop a good habit of disconnecting the power, and clean up any wood chips or other debris on the machine.

Other economic saw blade grinding machines of the same type QH200